Feature:1. Water outlet controller has stable performance, sturdiness and durability, safety and reliability2. Electric solenoid valve possess high sensitivity, quality assurance, and beautiful appearance, very practical3. Come with direct‑acting diaphragm structure, expanding its application field, no pressure start4. Normally closed outlet valve with threaded interface design, possess simple and convenient installation5. The normal operation is not less than 200,000. Adopt Imported stainless steel springs and good‑quality materialsSpecification:Item Type: Electric Solenoid ValveMaterial: Nylon + stainless steelThread Interface: G1/4Water Valve Type: Normally closed water outlet valveOperating environment altitude does not exceed 2500 meters; atmospheric pressure is 86~106KPaAmbient Temperature: +1℃~+45℃; Water Temperature: 0℃~ +100℃; Storage and Transportation Temperature: -30℃~ +60℃Protection Grade: IP00Relative Humidity: ≤95%Rated Working Voltage: DC12VInner Diameter/Outer Diameter: Approx. 9mm / 0.4in, 13mm / 0.5inWorking Pressure: 0.02~0.8MPaThread Length: Approx. 12mm / 0.5inCoil Resistance: 27.7Ω Package List:1 x Electric Solenoid ValveNote:The solenoid valve is mainly divided into normally open, normally closed, inlet valve and drain valve. The explanation is as follows, buyers must choose according to their own requirements, so as to avoid unnecessary losses caused by unsuitable purchases.1. Normally open‑refers to closing the valve when energized2. Normally closed‑refers to opening the valve when power is applied3. Water inlet valve‑‑refers to the water pressure environment of 0.02‑0.8MPa, where there is water pressure4. Drain valve‑refers to the water column used at the working pressure of s400mm