Parts List:1×Electric Foam Cutter 1×Power Cord 1×Stand 1×Instruction ManualDetailed description:Specification:Product Name: Electric Foam CutterMaterial: ABS + Stainless SteelHeating core rod diameter: 2 mmPlug Standard: USStyle (Optional): Style 01: 50 mmStyle 02: 100 mm01: Heating core rod length: 55 mm02: Heating core rod length: 105 mmPlastic handle length: 130 mmHandle diameter: 19 mmStainless steel connection end length: 20 mm01: Total length of hot pen: 205 mm02: Total length of hot pen: 255 mmVoltage and current: 12V2A01: Power: 18W02: Power: 24WTemperature: 450°Socket specification: 5.5×2.1-2.5Color: BlueNotes:1. The cutting pen should not work continuously for more than 30 minutes. After more than 30 minutes, it is best to turn off the power for 5 minutes before using it.2. When cutting, wait until it melts before moving the pen. Do not use too much pressure to cut, otherwise the pen tip will break.3. When bending, do not bend directly at a right angle, otherwise it will break or short-circuit the circuit inside. You should bend >R5MM rounded corners and only bend once. Bending back and forth will break the pen tip.4. When using the cutting pen, do not operate it vertically, because the heat of the pen tip will form a chimney effect and the heat will rise vertically. The rising heat will melt the handle. It is best to have a certain inclination.5. After plugging in the power supply, it is forbidden to touch the metal part of the pen with your hands to be careful of burns.