How to Use: 1. The brake should be fixed in the long axis direction with screws, fixing rings and shaft rings, and there should be no relaxation. In addition, attention the concentricity and perpendicularity between the suction plate mounting surface and the axis. 2. Please set up air extraction channel for the scattering of friction powder. 3. Prevent abrasion powder from entering the thin section inside the bearing. Specification: Item Type: Mobility Scooter Brake Material: Stainless Steel DC Voltage : 24V Static Friction Torsion :4Nm Power: 12W Scope of application: suitable for electric scooters, electric wheelchairs, airport electric luggage carts, electric moving carts, electric pulling carts Package List: 1 x Brake1 x Manual Note: 1. When installing, please adjust the interval between the friction surface of the coil and the suction piece mechanically within ±0.2% of the specified value. 2. Please use the bracket to keep light, do not make the clutch bearing under excessive pressure. 3. As for the screws used for installation, please install anti‑skid gaskets and fixers to prevent loosening. 4. When using mechanical side leads, make sure the connection is made with terminal boards, etc.